HQT-4420 Hitachi Vantara Qualified Professional - Content Platform Installation Questions and Answers

You must run the install program as root (C):To enable encryption for data at rest on anHCP system, the installation program must be executed withrootprivileges. Running the installation as root ensures that the program has the necessary permissions to configure encryption settings and other critical system operations, such as accessing low-level disk management functions and securing data at rest.

Once enabled, encryption cannot be disabled (D):In the HCP system, once encryption is enabled for data at rest, itcannot be disabled.This is a security feature designed to ensure that sensitive data remains protected throughout its lifecycle on the platform. Disabling encryption after it has been enabled would pose significant security risks, hence the system is designed to prevent this action to maintain data integrity and security.

Other options, like the encryption key being displayed several times during installation (A) or the use of SSH to enable encryption (B), are not applicable to the HCP installation and encryption process. The encryption key is carefully protected, and SSH is not specifically required for enabling encryption.

References:

Hitachi Vantara HCP Installation and Configuration Guide

Hitachi Vantara HCP Security Best Practices Guide

When performing an online upgrade of an HCP G10 and the upgrade fails, theArc-deploy logsare the relevant logs available to assist with troubleshooting. These logs contain detailed information about the deployment and upgrade processes, including errors or issues encountered during the upgrade. Accessing these logs allows administrators to diagnose the failure and take corrective actions.

Hitachi Vantara Content Platform Installation References:

The Arc-deploy logs are essential for understanding the sequence of events and identifying the exact step or component that caused the failure during an online upgrade of the HCP G10.

Pageant is a PuTTY authentication agent that is used to manage SSH keys for public-key authentication. When installing an HCP G10 and needing to connect to the node using PuTTY after installing the OS, Pageant can be used to forward SSH keys, allowing for a more secure and efficient connection without requiring manual password entry each time. Pageant stores the private keys and forwards them to the SSH client when required.

Hitachi Vantara Content Platform Installation References:

Pageant is specifically used in environments where SSH key management is necessary, particularly in secure installations of HCP systems where multiple nodes or connections are being managed.

When replacing an entire HCP G10 node, it is necessary to check the BIOS configuration. This ensures that the new hardware is correctly configured according to the required specifications for the HCP system. The BIOS settings need to be consistent with the rest of the cluster nodes to ensure proper functionality, performance optimization, and hardware compatibility. This check might include verifying boot order, enabling virtualization, setting appropriate hardware clock configurations, and other critical settings outlined in the "Hitachi Vantara HCP G10 Installation and Configuration Guide."QUESTION NO: 4

You are installing a HCP G10 with attached storage. The system will be networked using four 10 GbE SFP+ interfaces.

How many PCIe cards are installed in each HCP G10 node?

A. 1

B. 2

C. 3

D. 4

Answer:B

Each HCP G10 node with attached storage and networked using four 10 GbE SFP+ interfaces requires two PCIe cards. Typically, one PCIe card is allocated for network connectivity, while the other is used for storage connectivity. The cards need to support the necessary number of network interfaces and any additional connections required for attached storage. The specific configuration depends on the HCP model, but generally, two PCIe cards are sufficient to handle both networking and storage interfaces as described in the "HCP G10 Hardware Installation Guide."

On an HCP G10 node with six internal drives, the recommended configuration is to createa single RAID group with a single logical volume. This setup maximizes the available storagecapacity and provides a balanced approach to data protection, performance, and management simplicity. By using a single RAID group, the HCP system can efficiently manage data redundancy and integrity across all drives.

Hitachi Vantara Content Platform Installation References:

Configuring a single RAID group with a single logical volume simplifies management and provides optimal performance and redundancy, which aligns with the best practices for setting up an HCP G10 node.

The two supported speed combinations for the Front-End and Back-End networks of an HCP G11 are:

Front-End 10 GbE SFP+ and Back-End 10 GbE SFP+: This combination is suitable for environments requiring high-speed connectivity on both the front-end (client-facing) and back-end (internal HCP operations).

Front-End 25 GbE SFP+ and Back-End 10 GbE SFP+: This combination provides even faster front-end connectivity while maintaining robust back-end performance, accommodating scenarios where higher bandwidth is needed for external client access or data transfer.

Hitachi Vantara Content Platform Installation References:

The speed combinations align with the network capabilities and configurations supported by the HCP G11 platform, providing flexibility to match organizational needs for both front-end and back-end traffic requirements.

When installing an HCP G10 with attached storage using a VSP G1000, which is also used by several other applications, it is crucial to configure the system properly to allow shared storage use. The installation program for HCP G10 has a prompt that allows you to specify that shared storage is being used. By selecting this option, the system is informed that the VSP G1000 storage resources are shared among multiple applications, allowing for proper configuration and optimization to prevent any disruptions or conflicts. This ensures that HCP uses the storage without impacting other applications relying on the same storage system.

Hitachi Vantara Content Platform Installation References:

When setting up an HCP G10, especially in environments with shared storage configurations like the VSP G1000, the installation wizard will prompt for shared storage settings to ensure compatibility and optimal configuration.