You are managing a HPE ProLinat rack-mount server and need to determine when the Remote Console was most recently used.
Where can you find this information?
You are installing new drives into the internal cage of a HPE ProLiant DL380 server.
How is the drive device number set?
You are configuring a FlexFabric switch for a customer environment. The customer has requested specific SFP+ transceivers, power options, and cables.
Which HPE tool enables you to select and configure a switch according to precise specifications?
What can you do when installing an HPE switch to provide protection from electrostatic discharge?
A customer is expanding from local storage to a SAN environment for the firt time. They plan to future proof their environment with a 16 Gb Fibre Channel. They also want to allow for future I/O expansion with new servers.
Identify the correct server and storage to meet the customer requirements.
you are designing a system for a customer that runs an OLTP application. The customer has SAN based storage. They need to accelerate application performance.
Which HPE ProLiant Gen10 feature set will address this customer’s needs?
You are installing an HPE StoreOnce backup system in a customer’s environment. They need a simple and cost-effective method to centralize and automate the backup of multiple servers (file, virtualization, database). They also need the ability to integrate with an existing third-party backup software.
How must you configure the StoreOnce system to meet the customer’s requirements?
Refer to the exhibit.
You are validating a Nimble HF40 configuration created in OCA, and you receive an error when you run a CLIC check.
Which Nimble component needs to be added to the configuration to complete the solution?
Which statement is true regarding configuring memory in an HPE ProLiant server?
A customer needs to replace an existing storage array. The new array must be suitable for remote office deployment and support the following:
Which HPE storage platform will meet these requirements?
A customer wants to decrease problem resolution time on their HPE infrastructure.
Why would this customer benefit from Insight Remote Support?
You configured a port on an HPE FiexFabric 5900 series switch that is connected to a VMware ESXi server to support multiple VLANs
interface Ten-GigabitEthernet 1/0/11 description server ESXiOl-ethl port link-type trunk port trunk permit vlan 50 port trunk permit vlan 2 port trunk pvid vlan 50
Given the configuration above, what should happen to any untagged traffic coming from the VMware ESXI host?
Which protocol should be used to access an exported directory on a network-attached storage device?
A customer reports that their new iSCSI MSA 2052 has failed. You find that the MSA is up and running, but the servers cannot mount their LUNs.
Which troubleshooting steps should you prioritize? (Choose two.)
You need to update the firmware on an MSL2024.
Which HPE utility do you need to use?
A customer needs to connect two switches without VLANs or Spanning Tree. To which mode should the switches be set?
A customer is standardized on high-density, rack-mounted servers. They have an application that requires 3 six-drive RAID6 groups and redundant 10 Gb NICs.
What is the highest-density server that meets these customer requirements?
Refer to the exhibit.
You observed some high temperature alerts on a switch shown in the middle rack of the exhibit. The cooling in the data center is following best practices for the layout in the exhibit. The switch is an HPE 5945 series switch, and all the fans are operating normally. The switch is racked so that its ports face the rear of the rack. The administrator noticed the fan modules have red handles.
What should the administrator do to resolve the issue?
A small, expanding law firm wants to replace its single Windows server
The server will be kept in their library without a rack. They want a server that allows for internal storage growth and is capable of adding PCI adapters.
Which HPE server model type should you recommend?
What is the process or writing data to two locations within a single array in real time?
A customer purchased a Nimble HF20 a year ago They are experiencing an issue with a few of their VMware servers in the RTP Nimble date center and asked that you make a recommendation based on the data in infoSight.
What should you recommend'?
Given the solution shown in the exhibit, which adapter is required in the server to facilitate connective in Block.1?
You are installing a data center switch.
Which methods are recommended to configure the switch? (Choose two.)
A customer is upgrading their network infrastructure to provide the best performance for IP storage.
Which technologies in a network switch meet the customer’s needs? (Choose three.)
A customer needs a storage to run a database in an environment with many virtual machines. You have recommended a HPE MSA 2042 solution, but the customer has reservations about whether the MSA 2042 can deliver the required performance.
Which feature of MSA 2042 will help to improve iOP performance?
You are designing a server solution that requires a significant amount of memory.
Which guideline should you keep in mind when working with memory channels?
A customer needs to enable HPE Proactive Care and automated case creation for server hardware failures in their OneView environment.
Which step do you need to complete in OneView to accomplish these tasks?
You are upgrading firmware on two SN6000 switches in a fabric with a CLI connection. You did not wait for the upgrade to be activated on the first switch before beginning to install the firmware on the second switch.
What must you do to install the firmware on the second switch?
A customer needs a video archive repository initially starting at 30TB internal storage. The repository is expected to grow at 20% annually and should have a lifespan of 3 years.
Which HPE ProLiant server solution meets the customer’s requirements?
A customer needs to add storage capacity to a host In a remote branch office. They have limited IT resources, so the solution requires ease of integration at a low price point
Which HPE Storage family best meets these needs?
A customer has two HPE ProLiant Gen10 servers. They both require firmware installation.
Which HPE tool should you recommend to performing this task?
A customer needs to provide inventory management, health monitoring, status alerting, and reporting for their ProLiant servers.
Which HPE management offering meets the customer’s needs?
Which solution should you recommend to a customer for basic file and print services?
Where would a customer go to run the SSD wear Gauge report on an HPE ProLiant server?
A customer needs a virtual desktop infrastructure environment to quickly deploy new desktop images to more than 70 onsite contractors. They plan to use HPE ProLiant DL360 Gen10 servers running VMware ESXi connected to a shared storage device. The customer requires deduplication because they are concerned about the required storage capacity for the full clone images.
Which storage device would best address their concerns?
Which HPE MSA storage feature enables tuning the tier-migration algorithm for a virtual volume when creating or modifying the volume?
You need to create a dynamic bridge-aggregation group on a FlexFabric switch to ensure the ports are automatically configured with the applicable bridge-aggregation interface configuration
Drag the steps on the left Into their appropriate order in the answer area on the right.
DumpsMate's team of experts is always available to respond your queries on exam preparation. Get professional answers on any topic of the certification syllabus. Our experts will thoroughly satisfy you.
TESTED 01 Nov 2024
