H12-425_V2.0 HCIP-Data Center Facility Deployment V2.0 Questions and Answers

Air supply mode using blast caps.

Underfloor air supply mode

Air supply mode using wind pipe

In-row horizontal air supply mode

True

False

Intelligent alternating hibernation technology

High power density design

Hot swap

Installation against a wall

True

False

ON, ON

ON, OFF

OFF, ON

OFF, OFF

Data center planning

Report management

Alarm management

System management

System Settings

Maintenance

Home

Monitoring

True

False

As a control interface for the entire system, the ECM communicates with each module and provides a bus for communication between the dry contact card and the system control card.

The ECM controls the bypass module to work properly, if one ECM is faulty, the UPS can still work in normal mode but cannot be manually switched to bypass mode.

The ECM ensures equalized output currents between modules so that load power is equally shared.

The ECM provides three types of CAN communication: monitoring CAN communication, intra-rack parallel CAN communication, and inter-rack parallel CAN communication.

True

False

Block one of the pipe ports.

Fill the pipe with high-pressure nitrogen.

Quickly remove the pipe plug, and avoid facing people to prevent injury.

To discharge nitrogen from the outdoor unit.

The UPSS000-E-200K and UPS5000-E-400K use the same power module and provide the same capacity of 50 kVA but have different numbers of power modules.

For UPSs of the same model but in different power segments, their bypass module capacity is the same.

The power module capacity of both the UPS5000-S and UPS5000-E is 50 kVA. Therefore, the two types of UPS can be used together.

The power modules used in the UPSS000-S-1200K are the same as those used in the UPS5000-E-200K.

True

False