6103 Avaya ERS 8000 and Avaya VSP 9000 Implementation Exam Questions and Answers

Assign an IP address and a VLAN Id to the module.

Assign the DNS attributes and a server to the switch.

Assign an IP address and a VLAN Id to a port.

Assign the DHCP attributes to a given VLAN.

Distribute uplinks across different ERS 5500 switches in the stack.

Disable autonegotiation and replace it with VLACP to identify single fiber fault failure.

Use unique MLT IDs for each stack of edge ERS 5500 switches.

Enable Spanning Tree Protocol for the MLT when using it with SMLT in the core of the network.

The Ports have no link.

The Ports are in standby mode.

The Ports are being tested.

The Ports are manually disabled.

Routing

Data Path

Control Path

Management

The bandwidth management is handled by the CP modules.

SF modules in slots SF1 and SF4 provide bandwidth management across the I/O modules.

Bandwidth management is shared across all installed SF modules.

The SF module in slot SF1 provides bandwidth management for the I/O modules in slots 1-5, while the SF module in slot SF4 provides bandwidth management for slots 6-10.

The SF module in slot SF1 provides bandwidth management for even numbered slots (2,4,6,8,10), while the SF module in slot SF4 provides bandwidth management for odd numbered I/O slots (1,3,5,7,9).

Verify the port configuration parameters on the VSP 9000 system.

Verify that there is not a broadcast storm by mirroring the traffic on that port.

Verify the port configuration parameters on both ends of the connection.

Verify the cable type and connectors on both ends of the connection.

show port smlt {fastethernet|gigabitethernet|mlt|pos}

show mlt {fastethernet|gigabitethernet|mlt|pos}

show smlt {fastethernet|gigabitethernet|mlt|pos}

show port info mlt {fastethernet|gigabitethernet|mlt|pos}