A vSAN administrator has been provided hardware to create the vSAN infrastructure. AH six SSD devices per host are on the VMware HCL. The administrator wants to use the disk group configuration that would maximize the amount of vSAN cache available and help provide better storage performance for the new development workloads.
Which disk group configuration should be used?
An vSAN administrator is relying on vSAN Stretched Clusters to protect against entire-site failures. How is this protection accomplished?
An administrator is deploying a new 2-node vSAN cluster with a shared witness to a remote location. Which requirement must be met?
A vSAN administrator was presented with 30 additional vSAN ReadyNodes to add to an existing vSAN cluster. There is only one administrator to complete this task.
What is the fastest approach?
A storage administrator is facing degraded performance for the VMs running on a vSAN enabled vSphere Cluster and needs an out-of-the-box tool to identify the root cause of the problem.
Which tool should be used?
A host in the cluster experiences a permanent NIC failure, and the replacement part will not arrive until the next morning. The administrator needs to ensure the availability of the production workload at all times.
Which step should be taken by the administrator to meet this goal?
An Application Clustering Solution requires an in-guest attachable LUN which can be shared across two different VMs.
Which vSAN feature can meet this requirement?
Which two actions are recommended when adding a host to a vSAN cluster? (Choose two.)
A vSAN administrator has recently upgraded a vSAN cluster to 7.0 U1 and has enabled Capacity Reserve features to reduce the amount of capacity reserved for transient and rebuild operations.
Which scenario would prevent this feature from operating properly?
A vSAN administrator has two identical VMware vSAN clusters, one for staging workloads and another for production workloads. Due to an unforeseen capacity requirement, the vSAN administrator is tasked with merging the staging vSAN cluster into the production.
Which two actions should the vSAN administrator perform on the staging cluster prior to moving the vSAN nodes to the production cluster? (Choose two.)
An administrator has a 4-node vSAN cluster, and all virtual machine storage policies are configured as RAID-1 FTT-1. The administrator puts Host-1 in maintenance mode using "Ensure Accessibility".
During this time, Host-2, which is holding the updated object replica, fails permanently. A few moments later, Host-1 exits maintenance mode.
What happens to the writes that were committed on Host-2 after Host-1 enters this mode?
A vSAN administrator is deploying multiple 2-node clusters to remote branch offices. The nodes already have an old vSphere 7.0 image, but the administrator would like to update the image and ensure consistency across all the nodes.
The administrator configured vLCM on the first vSAN cluster and exported the image.
Which format should the administrator choose?
A vSAN administrator notices that the VMware Skyline Health: Network Latency Check reports indicate that three hosts are noncompliant.
Which action should the vSAN administrator take?
An administrator must choose between deploying a virtual witness or physical witness for a vSAN Stretched Cluster. The administrator eventually decides to use a virtual witness.
What is a benefit of selecting this approach?
A vSAN administrator is looking at adding a new vSAN cluster with hosts that have 512GB memory.
What is the minimum requirement for the node’s flash boot device?
A vSAN administrator has been asked to encrypt all traffic for data and metadata across all hosts in a vSAN cluster.
Which action is necessary to achieve this level of encryption?
An application refactor requires significant storage that is being added for logs stored on a VM vDISK. The application VMs runs on a dedicated vSAN enabled vSphere Cluster with custom CPUs and RAM, and therefore, cannot vMotion to another vSAN enabled cluster.
The administrator needs a vSAN feature that can be used to allocate additional storage from another vSAN enabled vSphere cluster to this vSAN enabled Cluster.
Which vSAN feature should be used for this purpose?
An administrator has deployed a development VMware vSAN 7.0 U1 cluster. It will be used by the development teams to deploy a mixture of cloud-native stateful applications alongside a combination virtual machine and Kubernetes workloads.
Which vSAN feature should be configured for the vSAN Data Persistence platform (vDPp)?
DumpsMate's team of experts is always available to respond your queries on exam preparation. Get professional answers on any topic of the certification syllabus. Our experts will thoroughly satisfy you.
TESTED 04 Dec 2024
