31860X Avaya IX Calling Design Exam Questions and Answers

You can now put the call on hold before dialing a feature access code.

You can now dial a feature access code without putting the call on hold.

You can now enter a feature access code before receiving a call.

You must now enter feature access codes before you put a call on hold.

9611G

9641

J129

J179

Multi-party (i.e. 3-party or greater) calls cannot shuffle, and require media-processing channels for the entire call.

SIP-SIP two-calls calls will use SIP Direct Media, so no media-processing channels are required for this call.

This call cannot shuffle, and one media-processing channel is required for the entire call.

This call will shuffle after initial call set-up; i.e., one media-processing (DSP) channel is required for the first 20 seconds of the call, for each party.

The Local Survivable Processor (LSP) connects directly to the SIP Service Provider.

The control of the branch SIP telephones transfers from the core network Session Manager to the Branch Session Manager.

Outgoing calls from the branch are routed through the LSP and branch gateway before going to the SIP Service Provider.

The branch gateways connect with the Local Survivable Processor (LSP), which serves as the controller.

Calculate the sum of H.323, analog and voice mail ports/stations, divide by six, then divide by 23, and round up the remainder.

Calculate the sum of the H.323 and analog stations, divide by six, and round up the remainder.

Calculate the sum of the H.323 and analog stations, divide by six, then divide by 23, and round up the remainder.

Calculate the sum of H.323, analog and voice mail ports/stations, divide by six, and round up the remainder.

If the deployment is supporting third-party digital stations

If the users require using T.38 fax

If there are multiple Instances supporting one Communications Manager

If the deployment is using a G722 codec for ad hoc conferencing