Black Friday Special - 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: dm70dm

1Y0-440 Architecting a Citrix Networking Solution Questions and Answers

Questions 4

Scenario: A Citrix Architect needs to design a new NetScaler Gateway deployment for a customer. During the design discussions, the architect learns that the customer would like to allow external RDP connections to internal Windows machines but does NOT want client drive redirection enabled on these connections.

Where should the architect enable the options to allow the customer to complete their requirement?

Options:

A.

NetScaler Gateway global settings

B.

RDP bookmark

C.

Session policy

D.

RDP server profile

E.

Session profile

F.

RDP client profile

Buy Now
Questions 5

Scenario: A Citrix Architect needs to design a new Citrix ADC Gateway deployment to provide secure RDP access to backend Windows machines.

Click the Exhibit button to view additional requirements collected by the architect during the design discussions.

1Y0-440 Question 5

To meet the customer requirements, the architect should deploy the RDP proxy through _______, using a _________ solution. (Choose the correct option to complete the sentence.)

Options:

A.

ICAProxy, stateless gateway

B.

CVPN; single gateway

C.

CVPN; stateless gateway

D.

ICAProxy; single gateway

Buy Now
Questions 6

Scenario: A Citrix Architect needs to deploy three VPX instances on NetScaler SDX 11500 device to meet the following design requirements:

  • Three (3) VPX instances must be provisioned on the SDX device.
  • Instance 1 must be utilized for deploying NetScaler Gateway virtual server.
  • Instance 2 must be utilized for deploying load balancing virtual servers for XML, Director, StoreFront, and Active Directory servers.
  • Separate IP address must be utilized for the communication with XenApp environment and LDAP communication.
  • Instance 3 must be used for deploying the test environment.
  • In the test environment, NetScaler Gateway virtual server, load balancing virtual servers for XML, Director, StoreFront and Active Directory servers must be configured.

How many IP addresses will be required to meet these design requirements?

Options:

A.

14

B.

20

C.

16

D.

18

Buy Now
Questions 7

Scenario: A Citrix Architect needs to design a hybrid Citrix Virtual App and Citrix Virtual Desktop environment which will include Citrix Cloud as well as resource locations in on-premises datacenter and Microsoft Azure.

Organizational details and requirements are as follows:

  • Active Citrix Virtual App and Citrix Virtual Desktop Service subscription
  • No existing NetScaler deployment
  • About 3,000 remote users are expected to regularly access the environment
  • Multi-factor authentication should be used for all external connections
  • Solution must provide load balancing for backend application servers
  • Load-balancing services must be in Location B

Click the Exhibit button to view the conceptual environment architecture.

1Y0-440 Question 7

The architect should use ________ in Location A, and should use _________ in Location B. (Choose the correct option to complete the sentence.)

Options:

A.

Citrix Gateway as a Service, no Ctrix products

B.

No Citrix products, Citrix ADC (BYO)

C.

Citrix Gateway as a Service, Citrix ADC (BYO)

D.

No Citrix products, Citrix ICA Proxy (cloud-licensed)

E.

Citrix Gateway as a Service, Citrix ICA Proxy (cloud-licensed)

F.

No Citrix products; Citrix Gateway appliance

Buy Now
Questions 8

For which three reasons should a Citrix Architect perform a capabilities assessment when designing and deploying a new NetScaler in an existing environment? (Choose three.)

Options:

A.

Understand the skill set of the company.

B.

Assess and identify potential risks for the design and build phase.

C.

Establish and prioritize the key drivers behind a project.

D.

Determine operating systems and application usage.

E.

Identify other planned projects and initiatives that must be integrated with the design and build phase.

Buy Now
Questions 9

Scenario: A Citrix Architect needs to plan for a customer environment in which more than 10,000 users will need access. The networking infrastructure needs to be able to handle the expected usage.

Which business driver should be prioritized based on the customer’s requirement?

Options:

A.

Increase flexibility

B.

Enable mobile work styles

C.

Simplify management

D.

Increase Scalability

E.

Reduce Costs

F.

Increase Security

Buy Now
Questions 10

Scenario: A Citrix Architect captured the following requirements during a design discussion held for a Citrix ADC design project.

  • There will be a pair of Citrix ADC MPX appliances deployed in the DMZ and another pair deployed in the internal network
  • High availability will be accessible for each Citrix ADC MPX appliance in both the DMZ (external) and LAN (internal) networks
  • DMZ Citrix ADC MPX appliances will have GSLB configured and deployed in Active/Passive mode
  • Load balancing for the internal Microsoft Exchange servers will be configured on the internal Citrix ADC appliances
  • Load balancing for SAP application servers in the DMZ will be configured on the DMZ Citrix ADC appliances
  • For the DMZ Citrix ADC MPX pair, the data and management traffic will be sent over the same interface.
  • The DMZ Citrix ADC MPX pair will have three interfaces available.

The users from the DMZ should NOT have access to servers in the internal zone

Which deployment mode should the architect use to deploy the Citrix ADC pair in the DMZ?

Options:

A.

One-Arm Mode

B.

Two-Arm Mode

C.

Hybrid Mode

D.

Transparent Mode

Buy Now
Questions 11

Scenario: A Citrix Architect has deployed Citrix Gateway integration with the StoreFront server. The Vasco server is used to perform WebAUTH to authenticate users The configuration snippet is as follows:

1Y0-440 Question 11

Which parameter is utilized to calculate the content-length insert in the request sent to the server?

Options:

A.

successRule

B.

Expl

C.

POST expresston

D.

Exp2

Buy Now
Questions 12

Scenario: A Citrix Architect needs to deploy a load balancing for an application server on the NetScaler. The authentication must be performed on the NetScaler. After the authentication, the Single Sign-on with the application servers must be performed using Kerberos impersonation.

Which three authentication methods can the Architect utilize to gather the credentials from the user in this scenario? (Choose three.)

Options:

A.

SAML

B.

OTP

C.

TACACS

D.

WEBAUTH

E.

LDAP

Buy Now
Questions 13

Which three tasks can a Citrix Architect select and schedule using the Citrix ADC maintenance tasks? (Choose three.)

Options:

A.

Convert Citrix Web App Firewall Policy Instances.

B.

Upgrade Citrix ADC CPX Instances

C.

Upgrade Citrix ADC Instances.

D.

Convert a high availability pair of Instances to Cluster.

E.

Convert cluster instances to a high availability pair.

F.

Configure a high availability pair of Citrix ADC Instances.

Buy Now
Questions 14

Scenario: The Workspacelab team has configured their NetScaler Management and Analytics (NMAS) environment. A Citrix Architect needs to log on to the NMAS to check the settings.

Which two authentication methods are supported to meet this requirement? (Choose two.)

Options:

A.

Certificate

B.

RADIUS

C.

TACACS

D.

Director

E.

SAML

F.

AAA

Buy Now
Questions 15

Scenario: A Citrix Architect and a team of Workspacelab members have met for a design discussion about the NetScaler Design Project. They captured the following requirements:

  • Two pairs of NetScaler MPX appliances will be deployed in the DMZ network and the internal network.
  • High availability will be accessible between the pair of NetScaler MPX appliances in the DMZ network.
  • Multi-factor authentication must be configured for the NetScaler Gateway virtual server.
  • The NetScaler Gateway virtual server is integrated with XenApp/XenDesktop environment.
  • Load balancing must be deployed for the users from the workspacelab.com and vendorlab.com domains.
  • The logon page must show the workspacelab logo.
  • Certificate verification must be performed to identify and extract the username.
  • The client certificate must have UserPrincipalName as a subject.
  • All the managed workstations for the workspace users must have a client identifications certificate installed on it.
  • The workspacelab users connecting from a managed workstation with a client certificate on it should be authenticated using LDAP.
  • The workspacelab users connecting from a workstation without a client certificate should be authenticated using LDAP and RADIUS.
  • The vendorlab users should be authenticated using Active Directory Federation Service.
  • The user credentials must NOT be shared between workspacelab and vendorlab.
  • Single Sign-on must be performed between StoreFront and NetScaler Gateway.
  • A domain drop down list must be provided if the user connects to the NetScaler Gateway virtual server externally.
  • The domain of the user connecting externally must be identified using the domain selected from the domain drop down list.

On performing the deployment, the architect observes that users are always prompted with two-factor authentication when trying to assess externally from an unmanaged workstation.

Click the exhibit button to view the configuration.

1Y0-440 Question 15

What should the architect do to correct this configuration?

Options:

A.

Unbind LoginSchema Policy LDAP_RADIUS from the virtual server.

B.

Bind the Portal theme as Domaindropdown.

C.

Bind the LoginSchema Policy Domaindropdown to priority 90.

D.

Bind the Default LoginSchema Policy as Domaindropdown.

Buy Now
Questions 16

Scenario: The Workspacelab team has implemented Citrix ADC high availability pair and Citrix ADC Management and Analytics System (Citrix Application Delivery Management). The Citrix Application Delivery Management was configured by a Citrix Architect to monitor and manage these devices. The Workspacelab team wants to load balance their Microsoft SharePoint servers on the Citrix ADC and needs the process to be streamlined and administered using Citrix Application Delivery Management.

The following requirements were discussed during the meeting:

  • The Microsoft SharePoint server should be optimized, load balanced, and secured in the network and should be deployed using Citrix Application Delivery Management.
  • All the configurations should be yenned before getting pushed to the Citrix Application Delivery Management.

Which feature should the architect use to configure the Microsoft SharePoint server using Citrix Application Delivery Management?

Options:

A.

StyleBooks

B.

Orchestration

C.

Configuration

D.

Jobs Analytics

Buy Now
Questions 17

Which format must a Citrix Architect utilize while importing the StyleBook in Citrix Application Delivery Management to compose the content of a StyleBook in the YAML editor?

Options:

A.

Raw

B.

NITRO APl

C.

Bundle

D.

HTML

E.

File

F.

SGML

Buy Now
Questions 18

_________ content type supports sending NITRO commands to NetScaler. (Choose the correct option to complete sentence.)

Options:

A.

Application/sgml

B.

Text/html

C.

Application/json

D.

Text/enriched

Buy Now
Questions 19

Which three methods can a Citrix Architect use to assess the capabilities of a network infrastructure? (Choose three.)

Options:

A.

Review existing monitoring solutions for periods of latency, lost packets, and insufficient bandwidth.

B.

Map the location of the users against the existing network topology.

C.

Alter firewall rules of existing network to fit into the new NetScaler Deployment.

D.

Examine the topology for single points of failure and potential bottlenecks.

E.

Ensure that users and computers are in the correct organizational units (OUs).

Buy Now
Questions 20

Scenario: A Citrix Architect needs to assess a NetScaler Gateway deployment that was recently completed by a customer and is currently in pre-production testing. The NetScaler Gateway needs to use ICA proxy to provide access to a XenApp and XenDesktop environment. During the assessment, the customer informs the architect that users are NOT able to launch published resources using the Gateway virtual server.

Click the Exhibit button to view the troubleshooting details collected by the customer.

1Y0-440 Question 20

What is the cause of this issue?

Options:

A.

The required ports have NOT been opened on the firewall between the NetScaler gateway and the Virtual Delivery Agent (VDA) machines.

B.

The StoreFront URL configured in the NetScaler gateway session profile is incorrect.

C.

The Citrix License Server is NOT reachable.

D.

The Secure Ticket Authority (STA) servers are load balanced on the NetScaler.

Buy Now
Questions 21

Scenario: A Citrix Architect has deployed two MPX devices. 12.0.53.13 nc and MPX 11500 models, in a high availability (HA) pair for the Workspace labs team. The deployment method is two-arm and the devices are installed behind a CISCO ASA 5585 Firewall. The architect enabled the following features on the Citrix ADC devices. Content Switching. SSL Offloading, Load Balancing, Citrix Gateway. Application Firewall in hybrid security and Appflow. All are enabled to send monitoring information to Citrix Application Delivery Management 12.0.53.13 nc build. The architect is preparing to configure load balancing for Microsoft Exchange 2016 server.

The following requirements were discussed during the implementation:

  • All traffic needs to be segregated based on applications, and the fewest number of IP addresses should be utilized during the configuration.
  • All traffic should be secured and any traffic coming Into FITTP should be redirected to HTTPS.
  • Single Sign-on should be created for Microsoft Outlook web access (OWA).
  • Citrix ADC should recognize Uniform Resource Identifier (URI) and close the session to Citrix ADC when users hit the Logoff button In Microsoft Outlook web access.
  • Users should be able to authenticate using either user principal name (UPN) or sAMAccountName.
  • The Layer 7 monitor should be configured to monitor the Microsoft Outlook web access servers and the monitor probes must be sent on SSL.

Which monitor will meet these requirements?

Options:

A.

add lb monitor mon.rpc HTTP-ECV -send "GET /rpc/healthcheck.htm" recv 200 -LRTM DISABLED -secure YES

B.

add lb monitor mon.rpc HTTP -send "GET /rpc/healthcheck.htm" recv 200 -LRTM DISABLED -secure YES

C.

add lb monitor mon.rpc HTTP-ECV -send "GET /owa/healthcheck.htm" recv 200 -LRTM DISABLED

D.

add lb monitor mon.rpc HTTP-ECV -send "GET /owa/healthcheck.htm" recv 200 -LRTM ENABLED

E.

add lb monitor mon.rpc HTTP-ECV -send "GET /rpc/healthcheck.htm" recv 200 -LRTM ENABLED

Buy Now
Questions 22

Scenario: Based on a discussion between a Citrix Architect and team of Workspacelab has been created across three (3) sites.

They captured the following requirements during the design discussion held for NetScaler design projects:

  • All three (3) Workspacelab sites (DC, NDR, and DR) will have similar NetScaler configuration and design.
  • Both external and internal NetScaler MPX appliances will have Global Server Load balancing (GSLB) configured and deployed in Active/Passive mode.
  • GSLB should resolve both A and AAA DNS queries.
  • In the GSLB deployment, the NDR site will act as backup for the DC site. whereas the DR site will act as backup for the NDR site.
  • When the external NetScaler replies to DNS traffic coming in through Cisco Firepower IPS, the replies should be sent back through the same path.
  • On the internal NetScaler, both front-end VIP and back-end SNIP will be part of the same subnet.
  • USIP is configured on the DMZ NetScaler appliances.
  • The external NetScaler will act default gateway for back-end servers.
  • All three (3) sites (DC, NDR, and DR) will have two (2) links to the Internet from different service providers configured in Active/Standby mode.

Which design decision must the architect make to meet the design requirements above?

Options:

A.

Interface 0/1 must be used for DNS traffic.

B.

The SNIP of the external NetScaler must be configured as default gateway on the back-end servers.

C.

ADNS service must be used with IPv6 address.

D.

Policy-Based Route with next hop as CISCO IPS must be configured on the external NetScaler.

Buy Now
Questions 23

Scenario: A junior Citrix Architect would like to use nFactor to perform authentication based on the domain. The junior architect has reached out to a supervisor for assistance and has been provided with the following step-by-step configuration guide:

  • Create Authentication policy for LDAP. RADIUS.
  • Create logon schema for Domain drop down. LDAP. LDAP+RADIUS, and noschema.
  • Create Authentication policy label for OnlyLDAR LDAP+RADIUS, and RADIUS.
  • Bind DOMAIN drop down as default logon schema policy
  • Create Authentication profile to bind the AAA virtual server.
  • Bind Authentication profile to Traffic management virtual server or Citrix Gateway virtual server.

What must the junior architect bind In order for the authentication to work correctly?

Options:

A.

The authentication policy label to Citrix ADC AAA virtual server

B.

The authentication policy label to the Citrix Gateway virtual server

C.

The logon schema to the AAA virtual server

D.

The logon schema to the Citrix ADC AAA virtual server

E.

The authentication policy label to the Traffic management virtual server

Buy Now
Questions 24

Which request can a Citrix Architect utilize to create a NITRO API command to add a NetScaler appliance with NSIP address 10.102.29.60 to the cluster?

1Y0-440 Question 24

1Y0-440 Question 24

1Y0-440 Question 24

1Y0-440 Question 24

Options:

A.

Option A

B.

Option B

C.

Option C

D.

Option D

Buy Now
Questions 25

Scenario: A Citrix Architect and a team of Workspacelab members met to discuss a Citrix ADC design project. They captured the following requirements from this design discussion:

  • All three (3) Workspacelab sites (DC, NOR, and DR) will have similar Citrix ADC configurations and design.
  • The external Citrix ADC MPX1 appliances will have Global Server Load Balancing (GSLB) configured and deployed in Active/Active mode.
  • ADNS service should be configured on the Citrix ADC to make it authoritative for domain nsg.workspacelab.com • In GSLB deployment, the DNS resolution should be performed to connect the user to the site with least network latency.
  • On the internal Citrix ADC, load balancing for StoreFront services, Citrix XML services, and Citrix Director services must be configured.
  • On the external Citrix ADC, the Gateway virtual server must be configured in ICA proxy mode.

Click the Exhibit button to view the logical representation of the network.

1Y0-440 Question 25

On which firewall should the architect configure the access policy to permit the MEP communication between the sites?

Options:

A.

CISCO IPS 1 and Checkpoint FW1

B.

CISCO IPS and CISCO IPS1

C.

CISCO IPS and Checkpoint FW1

D.

Checkpoint FW1 and DMZ ASA Firewall

Buy Now
Questions 26

Scenario: A Citrix Architect and a team of Workspacelab members met to discuss a Citrix ADC design project. They captured the following requirements from this design discussion:

  • All three (3) Workspacelab sites (DC. NDR. and DR) will have similar Citrix ADC configurations and design.
  • The external Citrix ADC MPX appliances will have Global Server Load Balancing (GSLB) configured and deployed in Active/Active mode
  • ADNS service should be configured on the Citrix ADC to make it authoritative for domain nsg Workspacelab.com.
  • In GSLB deployment, the DNS resolution should be performed to connect the user to the site with least network latency.
  • On the internal Citrix ADC, load balancing for StoreFront services, Citrix XML services, and Citrix Director services must be configured
  • On the external Citrix ADC. the Gateway virtual server must be configured in ICA proxy mode

Click the Exhibit button to view the logical representation of the network and the firewall policy prerequisites provided by the architect. On which two firewalls should the architect configure the policies? (Choose two.)

1Y0-440 Question 26

1Y0-440 Question 26

Options:

A.

CISCO IPS

B.

CISCO IPS 1

C.

DMZ ASA Firewall

D.

Checkpoint FW1

Buy Now
Questions 27

Scenario: A Citrix Architect needs to assess an existing on-premises NetScaler deployment which includes Advanced Endpoint Analysis scans. During a previous security audit, the team discovered that certain endpoint devices were able to perform unauthorized actions despite NOT meeting pre-established criteria.

The issue was isolated to several endpoint analysis (EPA) scan settings.

Click the Exhibit button to view the endpoint security requirements and configured EPA policy settings.

1Y0-440 Question 27

Which setting is preventing the security requirements of the organization from being met?

Options:

A.

Item 1

B.

Item 4

C.

Item 2

D.

Item 3

Buy Now
Questions 28

Scenario: A Citrix Architect needs to deploy SAML integration between NetScaler (Identity Provider) and ShareFile (Service Provider). The design requirements for SAML setup are as follows:

  • NetScaler must be deployed as the Identity Provider (IDP).
  • ShareFile server must be deployed as the SAML Service Provider (SP).
  • The users in domain workspacelab.com must be able to perform Single Sign-on to ShareFile after authenticating at the NetScaler.
  • The User ID must be UserPrincipalName.
  • The User ID and Password must be evaluated by NetScaler against the Active Directory servers SFO-ADS-001 and SFO-ADS-002.
  • After successful authentication, NetScaler creates a SAML Assertion and passes it back to ShareFile.
  • Single Sign-on must be performed.
  • SHA 1 algorithm must be utilized.

The verification environment details are as follows:

  • Domain Name: workspacelab.com
  • NetScaler AAA virtual server URL https://auth.workspacelab.com
  • ShareFile URL https://sharefile.workspacelab.com

Which SAML IDP action will meet the design requirements?

Options:

A.

add authentication samIIdPProfile SAMI-IDP –samISPCertName Cert_1 –samIIdPCertName Cert_2 –assertionConsimerServiceURL “https://auth.workspacelab.com/samIIssueName auth.workspacelab.com -signatureAlg RSA-SHA256-digestMethod SHA256-encryptAssertion ON -serviceProviderUD sharefile.workspacelad.com

B.

add authentication samIIdPProfile SAMI-IDP –samISPCertName Cert_1 –samIIdPCertName Cert_2 –assertionConsimerServiceURL https://sharefile.workspacelab.com/saml/acs” –samIIssuerName sharefile.workspacelab.com –signatureAlg RSA-SHA256 –digestMethod SHA256 –serviceProviderID sharefile.workspacelab.com

C.

add authentication samIIdPProfile SAMI-IDP –samISPCertName Cert_1 –samIIdPCertName Cert_2 –assertionConsimerServiceURL https://sharefile.workspacelab.com/saml/acs” –samIIssuerName auth.workspacelab.com –signatureAlg RSA-SHA1-digestMethod SHA1 –encryptAssertion ON –serviceProviderID sharefile.workspacelab.com

D.

add authentication samIIdPProfile SAMI-IDP –samISPCertName Cert_1 –samIIdPCertName Cert_2 –assertionConsimerServiceURL https://sharefile.workspacelab.com/saml/acs” –samIIssuerName sharefile.workspacelab.com –signatureAlg RSA-SHA1 –digestMethod SHA1 –encryptAssertion ON –serviceProviderID sharefile.workspacelab.com

Buy Now
Questions 29

Scenario: A Citrix Architect needs to design a new solution within Amazon Web Services (AWS) The architect would like to create a high availability Citrix ADC VPX pair to provide load balancing for applications hosted in the AWS deployment within a single availability zone which will receive traffic arriving from the Internet.

Which configuration should the architect choose to accomplish this?

Options:

A.

Two standalone Citrix ADC instances in the AWS marketplace, then deploy them as a cluster in the AWS management console

B.

A Citrix ADC AWS-VPX Cluster using a Citrix CloudFormation template in the AWS marketplace, then deploy it to create an Active-Passive high availability pair

C.

Two standalone Citrix ADC instances in the AWS marketplace, then deploy them as an Active-Passive high availability pair in the AWS management console

D.

Two standalone Citrix ADC instances in the AWS marketplace, deploy them in the AWS management console, then use an AWS Elastic Load Balancing load balancer to distribute client traffic across both instances

E.

Two Single AMI Citrix CloudFormation templates in the AWS marketplace then configure a high availability pair

Buy Now
Questions 30

Scenario: A Citrix Architect needs to design a new multi-datacenter Citrix ADC deployment. The customer wants Citrix ADC to provide access to various backend resources by using Global Server Load Balancing (GSLB) in an Active-Active deployment. Click the Exhibit button to view additional requirements identified by the architect.

1Y0-440 Question 30

Which GSLB algorithm or method should the architect use for the deployment based on the stated requirements?

Options:

A.

Dynamic round trip time (RTT)

B.

Least response time

C.

Least packets

D.

Source IP hash

E.

Static proximity

F.

Least connections

Buy Now
Questions 31

What are three potential risks when examining the disaster recovery plan and implementation for a company? (Choose three)

Options:

A.

Supporting infrastructure for proposed environment is NOT included in disaster recovery implementation

B.

A disaster recovery plan exists but has never been tested

C.

A disaster recovery location does NOT exist.

D.

Users require mobile devices with continuous access

E.

Optimal Gateway Routing decisions are NOT understood

Buy Now
Questions 32

Which parameter indicates the number of current users logged on to the Citrix gateway?

Options:

A.

ICA connections

B.

Total Connected Users

C.

Active user session

D.

Maximum User session

Buy Now
Questions 33

Scenario: A Citrix Architect needs to design a hybrid XenApp and XenDesktop environment which will include as well as resource locations in an on-premises datacenter and Microsoft Azure.

Organizational details and requirements are as follows:

  • Active XenApp and XenDesktop Service subscription
  • No existing NetScaler deployment
  • Minimization of additional costs
  • All users should correct directly to the resource locations containing the servers which will host HDX sessions

Click the Exhibit button to view the conceptual environment architecture.

1Y0-440 Question 33

The architect should use___________ in Location A, and should use _______________ in Location B. (Choose the correct option to complete the sentence.)

Options:

A.

No NetScaler products; NetScaler ICA Proxy (cloud-licensed)

B.

NetScaler Gateway as a Service; NetScaler ICA Proxy (cloud-licensed)

C.

NetScaler Gateway as a Service; no NetScaler products

D.

No NetScaler products; NetScaler Gateway appliance

E.

NetScaler gateway as a Service; NetScaler ADC (BYO)

Buy Now
Questions 34

Which StyleBook group should a Citrix Architect use to deploy the configuration for Microsoft SharePoint servers on Citrix ADC Management and Analytics (Citrix Application Delivery Management)?

Options:

A.

Default

B.

Public

C.

Private

D.

Custom

Buy Now
Questions 35

Scenario: A Citrix Architect and a team of Workspacelab members met to discuss a Citrix ADC design project. They captured the following requirements from this design discussion:

• All three (3) Workspacelab sites (DC, NDR, and DR) will have similar Citrix ADC configurations and design.

• The external Citrix ADC MPX appliances will have Global Server Load Balancing (GSLB) configured and deployed in Active/Active mode.

• ADNS service should be configured on the Citrix ADC to make it authoritative for domain nsg.workspaceIab.com.

• In GSLB deployment, the DNS resolution should be performed to connect the user to the site with least network latency.

• On the internal Citrix ADC, load balancing for StoreFront services, Citrix XML services, and Citrix Director services must be configured.

• On the external Citrix ADC, the Gateway virtual server must be configured in ICA proxy mode.

Which GSLB method should the architect utilize to meet the design requirements?

Options:

A.

Dynamic RTT

B.

Static Proximity

C.

Least Bandwidth

D.

Least Packets

Buy Now
Questions 36

A Citrix Architect needs to define the architect and operational processes required to implement and maintain the production environment.

In which phase of the Citrix Methodology will the architect define this?

Options:

A.

Define

B.

Deploy

C.

Assess

D.

Review

E.

Manage

F.

Design

Buy Now
Questions 37

Scenario: A Citrix Architect needs to design a new Citrix Gateway deployment for a customer. During the design discussions, the architect documents the key

requirements for the Citrix Gateway.

1Y0-440 Question 37

Click the Exhibit button to view the key requirements.

The architect should configure Citrix Gateway for __________________in order to meet the stated requirements. (Choose the correct option to complete the

sentence.)

Options:

A.

ICA proxy

B.

Client access

C.

VPN access

D.

ROP proxy

Buy Now
Questions 38

Which session parameter does the default authorization setting control when authentication, authorization, and auditing profiles are configured?

Options:

A.

Determines the default logging level

B.

Determines whether the Citrix ADC appliance will allow or deny access to content for which there is no specific authorization policy

C.

Determines the default period after which the user is automatically disconnected and must authenticate again to access the intranet

D.

Determines whether the Citrix ADC appliance will log users onto all web applications automatically after they authenticate or will pass users to the web application logon page to authenticate for each application.

E.

Controls are amount of time the users can be idle before they are automatically disconnected.

F.

Determines whether the Citrix ADC appliance will use primary or the secondary authentication for SSO

Buy Now
Questions 39

A Citrix Architect can execute a configuration job using a DeployMasterConfiguration template on a Citrix ADC____deployed________. (Choose the correct option to complete sentence:

Options:

A.

MPX; In high availability

B.

CPX: without partitions

C.

CPX; In high availability

D.

MPX; as a cluster Instance

E.

SDX; with more than 6 partitions

Buy Now
Questions 40

Which two parameters are required to ensure that after authentication, the cookies can be transferred from browser to non-browser applications? (Choose two.)

Options:

A.

Cookie should be Persistent cookie

B.

Cookie type should be HttpOnly

C.

Cookie type should NOT be HttpOnly

D.

Cookie type should have Secure Flag enabled

Buy Now
Questions 41

Scenario: A Citrix Architect needs to design a NetScaler deployment in Microsoft Azure. An Active-Passive NetScaler VPX pair will provide load balancing for three distinct web applications. The architect has identified the following requirements:

  • Minimize deployment costs where possible.
  • Provide dedicated bandwidth for each web application.
  • Provide a different public IP address for each web application.

For this deployment, the architect should configure each NetScaler VPX machine to have ______ network interface(s) and configure IP address by using ________. (Choose the correct option to complete the sentence).

Options:

A.

4; Port Address Translation

B.

1; Network Address Translation

C.

1; Port Address Translation

D.

2; Network Address Translation

E.

4; Network Address Translation

F.

2; Port Address Translation

Buy Now
Questions 42

Scenario: Based on a discussion between a Citrix Architect and a team of Workspacelab members, the MPX Logical layout for Workspacelab has been created across three (3) sites.

They captured the following requirements during the design discussion held for a Citrix ADC design project:

  • All three (3) Workspacelab sites (DC, NDR, and DR) will have similar Citrix ADC configurations and design.
  • Both external and internal Citrix ADC MPX appliances will have Global Server Load Balancing (GSLB) configured and deployed in Active/Passive mode.
  • GSLB should resolve both A and AAA DNS queries.
  • In the GSLB deployment, the NDR site will act as backup for the DC site, whereas the DR site will act as backup for the NDR site.
  • When the external Citrix ADC replies to DNS traffic coming in through Cisco Firepower IPS, the replies should be sent back through the same path.
  • On the internal Citrix ADC, both the front-end VIP and backend SNIP will be part of the same subnet.
  • The external Citrix ADC will act as default gateway for the backend servers.
  • All three (3) sites, DC, NDR, and DR, will have two (2) links to the Internet from different service providers configured in Active/Standby mode.

Which design decision must the architect make the design requirements above?

Options:

A.

MAC-based Forwarding must be enabled on the External Citrix ADC Pair.

B.

NSIP of the External Citrix ADC must be configured as the default gateway on the backend servers.

C.

The Internal Citrix ADC must be deployed in Transparent mode.

D.

The ADNS service must be configured with an IPv6 address.

Buy Now
Questions 43

Scenario: A Citrix Architect has deployed two MPX devices, 12.0.53.13 nc and MPX 11500 models, in a high availability (HA) pair for the Workspace labs team. The deployment method is two-arm. and the devices are installed behind a CISCO ASA 5585 firewall. The architect enables the following features on the Citrix ADC devices: Content Switching. SSL Offloading, Load Balancing, Citrix Gateway, Application Firewall in hybrid security, and Appflow. All are enabled to send monitoring information to Citrix Application Delivery Management 12.0.53.13 nc build. The architect is preparing to configure load balancing for Microsoft Exchange 2016 server.

The following requirements were discussed during the implementation:

  • All traffic needs to be segregated based on applications, and the fewest number of IP addresses should be utilized during the configuration.
  • All traffic should be secured, and any traffic coming into HTTP should be redirected to HTTPS.
  • Single Sign-on should be created for Microsoft Outlook web access (OWA).
  • Citrix ADC should recognize Uniform Resource Identifier (URI) and close the session to Citrix ADC, when users hit the Logoff button in Microsoft Outlook web access.
  • Users should be able to authenticate using user principal name (UPN).
  • The Layer 7 monitor should be configured to monitor the Microsoft Outlook web access servers, and the monitor probes must be sent on SSL.

Which Responder policy can be utilized to redirect the users from https://mail.citrix.com to https://mail.citrix.com/owa ?

Options:

A.

add responder action Act redirect ""https://mail.citrix.com/owa/ "" -responseStatusCode 302 add responder policy pol "http.REQ.URL.PATH_AND_QUERY.EQ("/")" Act

B.

add responder action Act redirect ""https://mail.citrix.com/owa/ "" -responseStatusCode 307 add responder policy pol "HTTP.REQ.IS_NOTVALID Act

C.

add responder action Act redirect ""https://mail.citrix.com/owa/ "" -responseStatusCode 302 add responder policy pol "HTTP.REQ.IS_NOTVALID Act

D.

add responder action Act redirect ""https://mail.citrix.com/owa/ "" -responseStatusCode 302 add responder policy pol "http.REQ.URL.PATH_AND_QUERY.EQ("/")" Act

Buy Now
Questions 44

Which three session settings are valid once a Citrix Architect has configured session settings to customize user sessions? (Choose three.)

Options:

A.

Single Sign-on Domain

B.

Credential Index

C.

KCD Profile

D.

Default Authentication Group

E.

Single Sign-on to Web Applications

F.

Session Idle Time

Buy Now
Questions 45

1Y0-440 Question 45

Which IP address should be bound to VLAN 11?

Options:

A.

40.50.60.2

B.

192.168.30.2

C.

40.50.60.172

D.

192.168.20.170

E.

192.168.20.2

F.

192.168.30.171

G.

40.50.60.172

Buy Now
Exam Code: 1Y0-440
Exam Name: Architecting a Citrix Networking Solution
Last Update: Nov 17, 2024
Questions: 152

PDF + Testing Engine

$49.5  $164.99

Testing Engine

$37.5  $124.99
buy now 1Y0-440 testing engine

PDF (Q&A)

$31.5  $104.99
buy now 1Y0-440 pdf
dumpsmate guaranteed to pass
24/7 Customer Support

DumpsMate's team of experts is always available to respond your queries on exam preparation. Get professional answers on any topic of the certification syllabus. Our experts will thoroughly satisfy you.

Site Secure

mcafee secure

TESTED 24 Nov 2024